SPECIFICATION :

Model

ST-5

ST-7

Control unit

MITSUBISHI-MELDAS M70B‭ / ‬FANUC OiMD

Travel

X‭-‬axis travel

500 mm

700 mm

Y‭-‬axis travel

400 mm

400 mm

Z‭-‬axis travel

300 mm

300 mm

Spindle nose to table

200~500 mm

200~500 mm

Spindle

Type of spindle

BT-30

BT-30

Spindle transmission

Direct Drive

Direct Drive

Spindle R.P.M.

12,000 rpm

12,000 rpm

Spindle motor

5.5 kw

5.5 kw

Feed

X/Y/Z rapid traverse

48 / 48 / 48 M/min

48 / 48 / 48 M/min

Three axes ball screws‭ ‬(mm)

ø32 / P16 / C3

ø32 / P16 / C3

Three axes linear guide (P class)

X, Y-axis ball screw: ball type 30 mm x 4 blocks, Z-axis ball screw: ball type 35mm x 4 blocks

Three axes transmission method

Direct drive

Direct drive

Cutting feed rate

1~10,000 mm/min

1~10,000 mm/min

Table

Table size

620 x 420 mm

800 x 420 mm

T-slot‭ ‬(‬WxNo‭.‬xPitch)

18 x 3 x 125 mm

18 x 3 x 125 mm

Table loading capacity

250 kg

350 kg

A.T.C.

Tool selection method

Arm type

Arm type

No‭. ‬of tools

14 pcs

14 pcs

Max‭. ‬tool weight

3 kgs

3 kgs

Miscellaneous

Coolant tank capacity

200 L

200 L

Max‭. ‬machine weight

2800 kg

3600 kg

Machine‭ ‬size‭ ‬(LxWxH)‭‬

1600 x 2100 x 2900 mm

2000 x 2440 x 3100 mm

Air pressure

6 kg

6 kg

Power requirement

15 KVA

15 KVA

•‭ ‬Design and specification are subject to change without prior notice‭.‬

Standare Accessories:

  • BT30 spindle
  • 12,000 rpm direct-drive spindle
  • Gripper type magazine (BT30,14 tools)
  • Spindle oil cooler
  • Automatic lubrication system
  • Ethernet transfer
  • LED work ligh
  • Rigid tapping
  • M30 automatic power off
  • Option Accessories:

  • 15,000/24,000 rpm direct-drive spindle
  • Servo magazine
  • Programmable coolant nozzle adjustment
  • Coolant through spindle (15 bar/20 bar)
  • 4th axis rotary table and tailstock
  • Automatic tool measuring device
  • Increase height of column
  • Screw type chip conveyor
  • Link chain type chip conveyor
  • Grease lubrication system
  • Oil / fluid separation device
  • Coolant gun and air gun